My Cart
The wig will stay on by itself but for extra security tighten the adjustor straps at the nape. If you have hair underneath or wear a wig cap, anchoring the wig and hair/wig cap with a grip can also help or if you have total hair loss, using double sided tape will also secure it.

Wig holding products:

The two important rules for putting on your wig correctly are to position the wig line at the front, 4 fingers width from your brow bone and to ensure the ear tabs on each side of the wig are evenly positioned to sit in front of your ears so the wig is straight. Hairpieces require a little practice. Our experienced stylists in our salons are more than happy to spend some time with you and advise how to do this.

No. A wig will not prevent your hair from growing back. However, if glues are used then please seek advice from your stylist.

We wouldn't recommend this however if you do, we recommend you wear an old wig/hairpiece to swim in. If this is not possible, you must wash the wig or hairpiece immediately after to rinse out any chlorine etc.

We do not recommend this, it will cut the lifespan of the wig/hairpiece in half. However, we understand this is not always possible so if you do, sleeping on a silk pillow is recommended. You can purchase our friction free silk pillow case here.

A wig cap is optional. It can be used to wrap up any existing hair or to act as a barrier against the wig.

WIG CUTTINGS AND FITTINGS

In all of our salons we will cut and style your piece. Most of the time, we will not need to alter any of the stock items, in most case it will just be a trim. If you prefer any of the human hair wigs or Custom Made then as standard a full restyle will be carried out to your personal style.

More advanced materials and techniques are constantly being explored by our research and development team at Trendco. Whatever the future may bring, clients may be assured that Trendco aims to continue at the forefront of all that is new and the very best in the hair replacement industry.

Appointments are advisable but please call the branch that you would like to visit. Private rooms are available upon request as these are limited.


HOW TO MEASURE HEADS FOR WIGS

To get the maximum comfort and security when wearing your wig, we recommend that you firstly measure your head for an accurate size. The average adult head size is 54cm, which majority of our wigs are but we do have a range of petite wigs too. Most of the wigs do come with an adjustable strap inside the cap which you can 1inch smaller or larger.

Make sure you flatten down any hair you have so it is not in the way when measuring and always use a soft measuring tape.

To measure your head, start at the front of your head at the hairline in the centre, place the start of the tape flat against your head. Feeding the tape through your fingers and around your head, going down to the nape then back up around the opposite side of your head returning back to the front. This is the circumference of your head. Always measure in Inches.

The front of the wig should settle into your natural hairline, four fingers above your eyebrows and it should come down to natural hairline at the back (nape).

circumference

Take a look at our specific aftercare instructions for each type of hair fibre we sell.

Watch our video on how to wash your Synthetic Wig properly:

CARING FOR YOUR FIBRE WIG OR HAIRPIECE


To keep your fibre wig or hairpiece looking its best between maintenance visits we encourage you to follow the instructions outlined below.

Remember, following the recommended guidelines and using the recommended aftercare products will enhance the appearance and extend the life of your item.

By following the easy steps provided and the guidance from your consultant, your item will continue to look and feel great!



FIBRE AFTERCARE ADVICE

If worn daily, we recommend you follow the steps below every 7-10 days.

STEP 1: DETANGLING - GENTLY BRUSH

Using a wire wig brush, gently brush to remove all knots and tangles before washing.

STEP 2: RINSE & SHAMPOO

For shorter styles: Fill a basin or large bowl with LUKEWARM water and mix in a small amount of T-Range shampoo until it has dissolved. Submerge your wig or hairpiece into the basin or large bowl and leave to soak for a couple of minutes. For longer styles, use running water, and ensure the water flows in the same direction as the hair to avoid tangling and damage. Next, lather your T-Range shampoo between your hands before gently applying the solution to the root area of your piece. Gently rinse away all product residue. Repeat if desired.

STEP 3: CONDITION

Using your fingers smooth a small amount of T-Range Softening conditioner through midlengths and ends, avoiding the base altogether. Gently brush through conditioner from midlengths to ends, whilst securely holding the base to avoid damage. Rinse thoroughly.

STEP 4: WRAP

Wrap piece in a towel, dabbing softly to remove excess moisture.

STEP 5: BRUSH

Supporting the base, gently brush your hairpiece or wig from midlength to end. Once brushed, place on a polyhead or wig stand.

STEP 6: DRY

At this stage, whilst it is damp, apply a light spray of the T-Range Soften ‘N’ Sheen and leave to air-dry naturally.

STEP 7: SHAKE & GO

Once dry, gently shake or brush your wig or hairpiece into the desired style. Once happy, for additional hold you may wish to apply some of the T-Range Holding Spray. For all other styling purposes we recommend Redken’s Styling range.


MAINTENANCE ADVICE

It is not recommended that you sleep in a fibre wig or hairpiece as this can result in friction frizz and a shorter life span. We would expect a well-maintained fibre item to last around 4-6 months, however some longer length styles may last only 2-3. Please keep in mind that these timeframes are based upon every day wear and that it is normal for your piece to shed during that time, excess shedding however can be due to poor upkeep. Speak to your Aderans stylist about how best to get the most out of your item.

 

 Download a PDF document of these instructions.

Synthetic Aftercare Products:

Watch our video on how to wash your Human Hair Wig properly:

CARING FOR YOUR HUMAN HAIR WIG OR HAIRPIECE


To keep your human hair wig/hairpiece looking its best between maintenance visits we encourage you to follow the instructions outlined below.

Remember, following the recommended guidelines and using the recommended aftercare products will enhance the appearance and extend the life of your wig or hairpiece.

By following the easy steps provided and the guidance from your consultant, your item will continue to look and feel great month after month!

 

 

HUMAN HAIR AFTERCARE ADVICE

If worn daily, we recommend that you wash your piece every 7-10 days.

STEP 1: DETANGLING - GENTLY BRUSH

Using a soft brush, gently brush to remove all knots and tangles before washing.

STEP 2: RINSE & SHAMPOO

We advise that you wash your item using LUKEWARM running water, ensuring it flows from root to tip as to avoid tangling and damage. Do NOT soak or submerge your item. Lather a small amount of Purelogy shampoo between your hands before evenly and gently smoothing the creamy solution through the hair in a downwards motion. Do NOT rub or agitate hair or base. Rinse by holding your wig or hairpiece under LUKEWARM running water, allowing all product residue to flow from root to tip until water runs clear. Repeat if required.

STEP 3: CONDITION

Using your fingers, evenly smooth a small amount of Pureology conditioner from midlength to end in a downwards motion, avoiding the base and roots altogether. Applying conditioner to the base may cause shedding. Allow conditioner to work for 3-5 minutes. For an intense recondition, use Pureology’s Superfood Treatment in place of conditioner. Rinse by holding wig/hairpiece under running LUKEWARM water until it runs clear.

STEP 4: WRAP

Gently wrap in a dry towel and press to remove excess water. Do NOT twist or wring.

STEP 5: PROTECT

Place your wet wig or hairpiece on a wig stand. Holding the bottle approximately 8 inches from the hair, lightly spray with Pureology Colour Fanatic whilst still damp. For lighter colours you may wish to use Pureology Strength Cure Best Blonde. Before drying you may wish to style the piece and may do so gently using your fingers.

STEP 6: DRY

Leave your piece to dry naturally overnight, or blow-dry. Please keep in mind that heat styling will shorten the life span of a human hair item. Before blow-drying, we recommend that the wig is turned inside out and that you first dry the base using a hair dryer set to a medium heat to reduce the risk of shedding. Once the base is dry, simply return piece the correct way and style as desired.

STEP 7: STYLE

Once your piece has dried, gently shake or brush into your desired style. If you wish to add some additional shine to your piece use a small amount of Pureology’s Hydrate Shine Max. For all other styling purposes we recommend Redken’s Styling range.

 

MAINTENANCE ADVICE

It is not recommended that you sleep in a human hair wig or hairpiece as this can result in tangling and a shorter life span. If sleeping in your wig, we advise that you sleep on a silk pillow case. We would expect a well-maintained human hair item to last up to 9 months. Please keep in mind that it is normal for your piece to shed during that time, excess shedding however can be due to poor upkeep. Human hair will naturally oxidise resulting in colour fade. This happens within the first few months of exposure to environmental factors. However, the colour can be restored by your stylist. Using excessive heat on lighter shades can produce inconsistent colour. Do not exceed 140 degrees celcius during heat styling on lighter shades. Longer human hair items may tangle in the nape area. We advise that you apply serum to troublesome areas and brush your piece throughout the day. A maintenance service will be required at around 3-4 months. Please speak to your Aderans stylist about how best to get the most out of your item.

 

 Download a PDF document of these instructions.

Human Hair Aftercare Products:

CARING FOR YOUR HIGH-HEAT FIBRE WIG OR HAIRPIECE


To keep your high-heat fibre wig or hairpiece looking its best between maintenance visits we encourage you to follow the instructions outlined in this leaflet.

remember, following the recommended guidelines and using the recommended aftercare products will enhance the appearance and extend the life of your item.

By following the easy steps provided and the guidance from your consultant, your item will continue to look and feel great!

 

 

FLEXI-FIBRE AFTERCARE ADVICE

 

If worn daily, we recommend you follow the steps below every 7-10 days.

STEP 1: DETANGLING - GENTLY BRUSH

Using a wire wig brush, gently brush to remove all knots and tangles before washing.

STEP 2: RINSE & SHAMPOO

For shorter styles: Fill a basin or large bowl with LUKEWARM water and mix in a small amount Cyber Revitalising until it has dissolved. Submerge your wig or hairpiece into the basin or large bowl and leave to soak for a couple of minutes. For longer styles, use running water, and ensure the water flows in the same direction as the hair to avoid tangling and damage. Next, lather your Cyber Revitalising shampoo between your hands before gently applying the solution to the root area of your piece. Gently rinse away all product residue. Repeat if desired.

STEP 3: CONDITION

Using your fingers smooth a small amount of Cyber Detangling Cream conditioner through midlengths and ends, avoiding the base altogether. Brush through conditioner from midlengths to ends, whilst holding the base as not to untie unnecassary fibres. Rinse thoroughly.

STEP 4: WRAP

Wrap piece in a towel, patting to remove excess moisture.

STEP 5: BRUSH

Supporting the base, gently brush your hairpiece or wig from midlength to end. Once brushed, place on a polyhead or wig stand.

STEP 6: DRY

At this stage, whilst it is damp, apply a light spray of the Cyber Moisture Protect Everyday Conditioner and leave to air-dry naturally, or blow-dry into the desired style.

STEP 7: SHAKE & GO

Once dry, gently shake or brush your wig or hairpiece into the desired style. Once happy, for additional hold you may wish to apply some of the Cyber Sculpt & Create Spray. For all other styling purposes we recommend Redken’s Styling range.


MAINTENANCE ADVICE

It is not recommended that you sleep in a high-heat fibre wig or hairpiece as this can result in friction frizz and a shorter life span. To reduce the level of friction frizz and ease tangles we recommend using our Cyber Moisture Protect Everyday Conditioner, using sparingly every 2nd day between washes. Although high-heat fibre is can be heat styled, you should never expose your piece to extreme or intense heat. We recommend that you blow-dry your item on a low heat, and never exced 140 degrees celcius when using heat styling tools. It is advised that you use only tools with a temperature gauge, testing your tools on a less visible section of fibre before comitting to styling. We would expect a well-maintained fibre item to last around 4-6 months, however some longer length styles may last only 2-3. Please keep in mind that these timeframes are based upon every day wear and that it is normal for your piece to shed during that time, excess shedding however can be due to poor upkeep. Speak to your Aderans stylist about how best to get the most out of your item.

 

 Download a PDF document of these instructions.

Heat Resistant Aftercare Products:

CARING FOR YOUR FUTURA FIBRE WIG OR HAIRPIECE


To keep your Futura Fibre system looking its best between maintenance visits we encourage you to follow the instructions outlined in this leaflet.

Remember, following the recommended guidelines and using specially formulated Futura Fibre aftercare products will enhance the appearance and extend the life of your system. Futura Fibre requires specific haircare products to best suit your needs and lifestyle.

These products are formulated with special ingredients to retain and protect the Futura Fibre’s moisture content, further enhancing its appearance.

By following the easy steps provided in our aftercare advice leaflet and the guidance from your Futura Fibre consultant, your hair system will continue to look and feel great month after month!

 

FUTURA FIBRE AFTERCARE ADVICE

STEP 1: CLEANSING - REVITALISING SHAMPOO

Cleansing your hair system once removed: Softly comb your piece to remove any tangles. Pour a small amount of REVITALISING SHAMPOO into a basin of LUKEWARM water and stir. Submerge the piece and leave to soak for 3-5 minutes, allowing cleansing treatment to freshen the hair. Gently swish your hair system in the water and rinse gently.

STEP 2: CONDITIONING – DETANGLE CREAM

After rinsing, dilute a small amount of DETANGLE CREAM into a basin of LUKEWARM water. Once again, submerge the system and allow to soak for 3-5 minutes in the treatment to condition the hair. Gently swish the piece in the solution. Rinse.

STEP 3: SOAKING

Immerse your Futura Hair wig or hairpiece into a basin of 40°C hot water and leave to soak for 20 minutes, this step is very important to replenish the moisture.

STEP 4: DRYING

Wrap the system in a dry, friction-free, towel and gently dab dry. DO NOT massage or rub.

STEP 5: DAILY PROTECTION – MOISTURE PROTECTION SPRAY

Before brushing your system, apply MOISTURE PROTECTION SPRAY on the damp hair. Hold the bottle approximately 8 inches from the hair and apply a fine mist.

STEP 6: BRUSHING

Gently brush hair with a soft wig brush. Always spray your wig or hairpiece with Moisture Protection Spray before and after brushing.

STEP 7: STYLING

You can use a hairdryer on a low heat to dry your hair system. DO NOT dry the system completely as it will remove too much of the required moisture. After brushing and styling, repeat STEP 5. We recommend only sleeping with satin or silk pillowcases, as this will reduce friction.


It is advisable to follow the above procedures every 3 – 4 days to replenish the moisture content of the hair system.


MAINTENANCE ADVICE

It is not recommended that you sleep in a Futura Fibre wig or hairpiece as this can result in friction frizz and a shorter life span. To reduce the level of friction frizz and ease tangles we recommend using our Cyber Moisture Protect Everyday Conditioner, using sparingly every 2nd day between washes. Although Futura Fibre can be heat styled, you should never expose your piece to extreme or intense heat. We recommend that you blow-dry your item on a low heat, and never exceed 140 degrees celcius when using heat styling tools. It is advised that you use only tools with a temperature gauge, testing your tools on a less visible section of fibre before comitting to styling. We would expect a well-maintained Futura Fibre item to last around 4-6 months, however some longer length styles may last only 2-3. Please keep in mind that these time frames are based upon everyday wear and that it is normal for your piece to shed during that time, excess shedding however can be due to poor upkeep. Speak to your Aderans stylist about how best to get the most out of your item.

 

 Download a PDF document of these instructions.

Future Hair Aftercare Products:

CYBER INTENSIVE TREATMENT 100ML

In stock
SKU
CYBER INTENSTIVE 100
£5.04 £4.20
Intense, nourishing and replenishing treatment reccommended for your CyberHair,V-hair and High-Heat pieces. Bottle size 100mls.