- No reviews collected for this product yet -
Be the first to write a review
New content loaded
| Collection | Alexander Couture |
| Production information | Product contains metal stays and latex. Silicone is used in the production of this product. |
| Country of origin | Thailand |
| Gender | WOMENS |
| Hair type | FLEXI-FIBRE/HIGH HEAT FIBRE |
| Cap construction | Lace Front, Part Monofilament |
| Cap size CM | 54 |
| Crown (cm) | 33 |
| Fringe (cm) | 28 |
| Nape (cm) | 30 |
The wig will stay on by itself but for extra security tighten the adjustor straps at the nape. If you have hair underneath or wear a wig cap, anchoring the wig and hair/wig cap with a grip can also help or if you have total hair loss, using double sided tape will also secure it.
Wig holding products:
The two important rules for putting on your wig correctly are to position the wig line at the front, 4 fingers width from your brow bone and to ensure the ear tabs on each side of the wig are evenly positioned to sit in front of your ears so the wig is straight. Hairpieces require a little practice. Our experienced stylists in our salons are more than happy to spend some time with you and advise how to do this.
No. A wig will not prevent your hair from growing back. However, if glues are used then please seek advice from your stylist.
We wouldn't recommend this however if you do, we recommend you wear an old wig/hairpiece to swim in. If this is not possible, you must wash the wig or hairpiece immediately after to rinse out any chlorine etc.
We do not recommend this, it will cut the lifespan of the wig/hairpiece in half. However, we understand this is not always possible so if you do, sleeping on a silk pillow is recommended. You can purchase our friction free silk pillow case here.
A wig cap is optional. It can be used to wrap up any existing hair or to act as a barrier against the wig.
WIG CUTTINGS AND FITTINGS
In all of our salons we will cut and style your piece. Most of the time, we will not need to alter any of the stock items, in most case it will just be a trim. If you prefer any of the human hair wigs or Custom Made then as standard a full restyle will be carried out to your personal style.
More advanced materials and techniques are constantly being explored by our research and development team at Trendco. Whatever the future may bring, clients may be assured that Trendco aims to continue at the forefront of all that is new and the very best in the hair replacement industry.
Appointments are advisable but please call the branch that you would like to visit. Private rooms are available upon request as these are limited.
HOW TO MEASURE HEADS FOR WIGS
To get the maximum comfort and security when wearing your wig, we recommend that you firstly measure your head for an accurate size. The average adult head size is 54cm, which majority of our wigs are but we do have a range of petite wigs too. Most of the wigs do come with an adjustable strap inside the cap which you can 1inch smaller or larger.
Make sure you flatten down any hair you have so it is not in the way when measuring and always use a soft measuring tape.
To measure your head, start at the front of your head at the hairline in the centre, place the start of the tape flat against your head. Feeding the tape through your fingers and around your head, going down to the nape then back up around the opposite side of your head returning back to the front. This is the circumference of your head. Always measure in Inches.
The front of the wig should settle into your natural hairline, four fingers above your eyebrows and it should come down to natural hairline at the back (nape).
Take a look at our specific aftercare instructions for each type of hair fibre we sell.
Watch our video on how to wash your Synthetic Wig properly:
CARING FOR YOUR FIBRE WIG OR HAIRPIECE
To keep your fibre wig or hairpiece looking its best between maintenance visits we encourage you to follow the instructions outlined below.
Remember, following the recommended guidelines and using the recommended aftercare products will enhance the appearance and extend the life of your item.
By following the easy steps provided and the guidance from your consultant, your item will continue to look and feel great!
FIBRE AFTERCARE ADVICE
If worn daily, we recommend you follow the steps below every 7-10 days.
STEP 1: DETANGLING - GENTLY BRUSH
Using a wire wig brush, gently brush to remove all knots and tangles before washing.
STEP 2: RINSE & SHAMPOO
For shorter styles: Fill a basin or large bowl with LUKEWARM water and mix in a small amount of T-Range shampoo until it has dissolved. Submerge your wig or hairpiece into the basin or large bowl and leave to soak for a couple of minutes. For longer styles, use running water, and ensure the water flows in the same direction as the hair to avoid tangling and damage. Next, lather your T-Range shampoo between your hands before gently applying the solution to the root area of your piece. Gently rinse away all product residue. Repeat if desired.
STEP 3: CONDITION
Using your fingers smooth a small amount of T-Range Softening conditioner through midlengths and ends, avoiding the base altogether. Gently brush through conditioner from midlengths to ends, whilst securely holding the base to avoid damage. Rinse thoroughly.
STEP 4: WRAP
Wrap piece in a towel, dabbing softly to remove excess moisture.
STEP 5: BRUSH
Supporting the base, gently brush your hairpiece or wig from midlength to end. Once brushed, place on a polyhead or wig stand.
STEP 6: DRY
At this stage, whilst it is damp, apply a light spray of the T-Range Soften ‘N’ Sheen and leave to air-dry naturally.
STEP 7: SHAKE & GO
Once dry, gently shake or brush your wig or hairpiece into the desired style. Once happy, for additional hold you may wish to apply some of the T-Range Holding Spray. For all other styling purposes we recommend Redken’s Styling range.
MAINTENANCE ADVICE
It is not recommended that you sleep in a fibre wig or hairpiece as this can result in friction frizz and a shorter life span. We would expect a well-maintained fibre item to last around 4-6 months, however some longer length styles may last only 2-3. Please keep in mind that these timeframes are based upon every day wear and that it is normal for your piece to shed during that time, excess shedding however can be due to poor upkeep. Speak to your Aderans stylist about how best to get the most out of your item.
Download a PDF document of these instructions.
Synthetic Aftercare Products:
Watch our video on how to wash your Human Hair Wig properly:
CARING FOR YOUR HUMAN HAIR WIG OR HAIRPIECE
To keep your human hair wig/hairpiece looking its best between maintenance visits we encourage you to follow the instructions outlined below.
Remember, following the recommended guidelines and using the recommended aftercare products will enhance the appearance and extend the life of your wig or hairpiece.
By following the easy steps provided and the guidance from your consultant, your item will continue to look and feel great month after month!
HUMAN HAIR AFTERCARE ADVICE
If worn daily, we recommend that you wash your piece every 7-10 days.
STEP 1: DETANGLING - GENTLY BRUSH
Using a soft brush, gently brush to remove all knots and tangles before washing.
STEP 2: RINSE & SHAMPOO
We advise that you wash your item using LUKEWARM running water, ensuring it flows from root to tip as to avoid tangling and damage. Do NOT soak or submerge your item. Lather a small amount of Purelogy shampoo between your hands before evenly and gently smoothing the creamy solution through the hair in a downwards motion. Do NOT rub or agitate hair or base. Rinse by holding your wig or hairpiece under LUKEWARM running water, allowing all product residue to flow from root to tip until water runs clear. Repeat if required.
STEP 3: CONDITION
Using your fingers, evenly smooth a small amount of Pureology conditioner from midlength to end in a downwards motion, avoiding the base and roots altogether. Applying conditioner to the base may cause shedding. Allow conditioner to work for 3-5 minutes. For an intense recondition, use Pureology’s Superfood Treatment in place of conditioner. Rinse by holding wig/hairpiece under running LUKEWARM water until it runs clear.
STEP 4: WRAP
Gently wrap in a dry towel and press to remove excess water. Do NOT twist or wring.
STEP 5: PROTECT
Place your wet wig or hairpiece on a wig stand. Holding the bottle approximately 8 inches from the hair, lightly spray with Pureology Colour Fanatic whilst still damp. For lighter colours you may wish to use Pureology Strength Cure Best Blonde. Before drying you may wish to style the piece and may do so gently using your fingers.
STEP 6: DRY
Leave your piece to dry naturally overnight, or blow-dry. Please keep in mind that heat styling will shorten the life span of a human hair item. Before blow-drying, we recommend that the wig is turned inside out and that you first dry the base using a hair dryer set to a medium heat to reduce the risk of shedding. Once the base is dry, simply return piece the correct way and style as desired.
STEP 7: STYLE
Once your piece has dried, gently shake or brush into your desired style. If you wish to add some additional shine to your piece use a small amount of Pureology’s Hydrate Shine Max. For all other styling purposes we recommend Redken’s Styling range.
MAINTENANCE ADVICE
It is not recommended that you sleep in a human hair wig or hairpiece as this can result in tangling and a shorter life span. If sleeping in your wig, we advise that you sleep on a silk pillow case. We would expect a well-maintained human hair item to last up to 9 months. Please keep in mind that it is normal for your piece to shed during that time, excess shedding however can be due to poor upkeep. Human hair will naturally oxidise resulting in colour fade. This happens within the first few months of exposure to environmental factors. However, the colour can be restored by your stylist. Using excessive heat on lighter shades can produce inconsistent colour. Do not exceed 140 degrees celcius during heat styling on lighter shades. Longer human hair items may tangle in the nape area. We advise that you apply serum to troublesome areas and brush your piece throughout the day. A maintenance service will be required at around 3-4 months. Please speak to your Aderans stylist about how best to get the most out of your item.
Download a PDF document of these instructions.
Human Hair Aftercare Products:
CARING FOR YOUR HIGH-HEAT FIBRE WIG OR HAIRPIECE
To keep your high-heat fibre wig or hairpiece looking its best between maintenance visits we encourage you to follow the instructions outlined in this leaflet.
remember, following the recommended guidelines and using the recommended aftercare products will enhance the appearance and extend the life of your item.
By following the easy steps provided and the guidance from your consultant, your item will continue to look and feel great!
FLEXI-FIBRE AFTERCARE ADVICE
If worn daily, we recommend you follow the steps below every 7-10 days.
STEP 1: DETANGLING - GENTLY BRUSH
Using a wire wig brush, gently brush to remove all knots and tangles before washing.
STEP 2: RINSE & SHAMPOO
For shorter styles: Fill a basin or large bowl with LUKEWARM water and mix in a small amount Cyber Revitalising until it has dissolved. Submerge your wig or hairpiece into the basin or large bowl and leave to soak for a couple of minutes. For longer styles, use running water, and ensure the water flows in the same direction as the hair to avoid tangling and damage. Next, lather your Cyber Revitalising shampoo between your hands before gently applying the solution to the root area of your piece. Gently rinse away all product residue. Repeat if desired.
STEP 3: CONDITION
Using your fingers smooth a small amount of Cyber Detangling Cream conditioner through midlengths and ends, avoiding the base altogether. Brush through conditioner from midlengths to ends, whilst holding the base as not to untie unnecassary fibres. Rinse thoroughly.
STEP 4: WRAP
Wrap piece in a towel, patting to remove excess moisture.
STEP 5: BRUSH
Supporting the base, gently brush your hairpiece or wig from midlength to end. Once brushed, place on a polyhead or wig stand.
STEP 6: DRY
At this stage, whilst it is damp, apply a light spray of the Cyber Moisture Protect Everyday Conditioner and leave to air-dry naturally, or blow-dry into the desired style.
STEP 7: SHAKE & GO
Once dry, gently shake or brush your wig or hairpiece into the desired style. Once happy, for additional hold you may wish to apply some of the Cyber Sculpt & Create Spray. For all other styling purposes we recommend Redken’s Styling range.
MAINTENANCE ADVICE
It is not recommended that you sleep in a high-heat fibre wig or hairpiece as this can result in friction frizz and a shorter life span. To reduce the level of friction frizz and ease tangles we recommend using our Cyber Moisture Protect Everyday Conditioner, using sparingly every 2nd day between washes. Although high-heat fibre is can be heat styled, you should never expose your piece to extreme or intense heat. We recommend that you blow-dry your item on a low heat, and never exced 140 degrees celcius when using heat styling tools. It is advised that you use only tools with a temperature gauge, testing your tools on a less visible section of fibre before comitting to styling. We would expect a well-maintained fibre item to last around 4-6 months, however some longer length styles may last only 2-3. Please keep in mind that these timeframes are based upon every day wear and that it is normal for your piece to shed during that time, excess shedding however can be due to poor upkeep. Speak to your Aderans stylist about how best to get the most out of your item.
Download a PDF document of these instructions.
Heat Resistant Aftercare Products:
Leoni
Colour option
StockSelect a option first
StockSelect a option first
Only %1 left
SKU
LEONI
As low as
£213.00
£177.50
This stunning mid-length style features a stylish curl pattern, made with heat-friendly fiber which allows you to easily switch up your look. The lace front and lace part create a seamless, natural-looking hairline. Colour shown is Autumn Sunrise.